CNHF has built the cloud control system of high frequency vacuum timber dryer, which can realize remote control drying, not only ensure the drying quality, but also reduce the drying cost.It is suitable for high-efficiency removal of wood stress (especially wood secondary drying balance), fast drying of large section thick wood, fast drying of hard wood (especially mahogany), fast drying of small batch wood, drying of

floor and surface boards, and drying of veneers.Typical drying parameters: The dry thickness of hard timber (red timber) is 6cm, it only takes 6 days to dry rosewood with moisture of 35%-50% to11%-13% and secondary balanced drying of timber can be performed (only taking several ours).The intelligent control cloud platform operating system can provide technical support for drying process remotely, and has built-in multiple process templates, which can be directly obtained the process template according to the material to match which need to be dried. When new tree species are dried, then entire drying process data Stored, the next drying this material can be directly obtained.

Intelligent drying / Unattended

High-frequency heating, heating the wood inside and outside at the same time, uniform heating, fast drying speed and short time. The wood is vaporized at low temperature in a vacuum environment, it is not easy to deform and crack, and the quality is good. Intelligent control system, easy operation, unattended wood drying process. Environmental protection and safety, no boiler, insecticide and sterilization.material.

The whole tank body and corresponding parts are made of304 stainless steel, which effectively slows down the corrosion of the equipment by organic acids and alkalis in the wood, and avoids the need for regular anti-corrosion maintenance and pollution to the wood. /